#1  
Old 03-20-2016, 12:34 PM
axe123 axe123 is offline
 
Location: Canada
Posts: 24
Default Hose load question

Anyone here know what the hose load is called when you hook up your transverse then have your male end stretched out away from the truck then you take another hose and lay it on top in the other direction with the male end toward the transverse compartment keeping it about six feet back from the female end connected to the truck, then you roll it up on to the bed in a flat load type fashion then couple the hose together at the end leaving a loop. once this is done you connect the male coupling that you had kept back 6 feet (that is now at the bottom of the bed) and connect the next 100' and continue with just a normal flat load with the nozzle at the end?

Hope this poor explanation helps haha Thanks guys
Reply With Quote
  #2  
Old 03-21-2016, 06:34 AM
hmckay91's Avatar
hmckay91 hmckay91 is offline
 
Posts: 423
Default

Sounds like you are describing a Minuteman load. If not consider it instead of what you are describing.

Quote:
the minuteman load is designed to be carried and deployed from a firefighter's shoulder. Because the minuteman is carried as a bundle and plays off the shoulder, it works well for engine companies that frequently stretch hose around corners, up stairs, or in areas congested with entanglements.
Quote:
firefighters carry the bulk of the hose instead of drag it. Hose plays off their shoulders as they lay it over and around obstacles.
http://www.firefightingincanada.com/...hose-load-2798

http://www.fireengineering.com/artic...ose-loads.html

See attachment as well.
Attached Images
File Type: jpg 15-59.jpg (158.0 KB, 42 views)
__________________
There's never time to do it right but always time to do it over.
Reply With Quote
  #3  
Old 03-26-2016, 08:30 AM
3rdGen's Avatar
3rdGen 3rdGen is offline
 
Posts: 238
Default

Agreed, if it isn't the minute man consider changing to it.
as mentioned ideal for single fire fighter stretch when you want to deploy around obsticals/corners/stairs etc.

what is the purpose of the hose load you have described?
__________________
"You can't be wrong for doing the right thing"
Reply With Quote
  #4  
Old 09-07-2016, 06:50 AM
stomper11 stomper11 is offline
 
Posts: 4
Default

Unless your management don't change the truck. We have guys who change our truck tool layouts and hose loads as they see fit The discussion has to come first, not moving stuff and then emailing people of the change. The Minute man lay has a purpose but it isn't the best lay all the time for all the jobs.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 06:30 PM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.