Old 01-14-2010, 05:35 AM
dentedhead's Avatar
dentedhead dentedhead is offline
Location: Ontario
Posts: 6,546

Originally Posted by guitarmedic87 View Post
Is it possible it defers from province to province??
No your numbers ^^ are correct,the difference is what device is in use,the manual units are all adjustable so shocks can be given per circumstance ie cardioversion.

The AEDS may only shock at one preset and not stack the rest of the shocks.The semi AED can also be set manually but not in the same way as a manual defib.

Thousand a week for hide and seek on call when Im paid to be.
Reply With Quote
Old 01-14-2010, 08:29 AM
cmollison's Avatar
cmollison cmollison is offline
Senior Member
Location: Thornhill
Posts: 714
Send a message via MSN to cmollison

Originally Posted by guitarmedic87 View Post
I was under the understanding that Life Pack 500s that we use at our station shock at 200-300-360J's and the Life pack 12s that I use at work are the same 200,300,360,when not in manual mode.
Every province or Medical Director is different but more AED's are delivering the same joule amount every shock. Recent studies have shown that when you increase the shock amount over a period of time more damage is done to the heart muscles with little or no gain. Where has if you deliver the same amount joules at 200 it is just as effective without all the damage if it does occur. So when AMECA's show up and dip into their bag of goodies the patient has a better chance of leading a better life without as many complications.

This is why they also changed shock protocol to 2 minutes of CPR, shock, 2 mins CPR, shock, 2 mins of cpr, shock, cpr, cpr, cpr.
Life without knowledge is death in disguise.
Reply With Quote
Old 01-14-2010, 10:32 AM
FFEMT51 FFEMT51 is offline
Posts: 60

i'm pretty sure that ours deliver 200 joules on every shock. they are biphasic
"everyone goes home"
Reply With Quote
Old 01-14-2010, 02:44 PM
CKL958 CKL958 is offline
Senior Member
Posts: 315

Originally Posted by prmdc_girl91 View Post
Yes sorry I phrased that wrong. Thanks to everyone who was able to read past my mistake!
Sorry - everyone has one of those things that bugs them - my fulltime field deals with electricity, and when ordering, stuff like that is quite important (It can make the difference between stuff running properly, and a big BANG!)

"We're all in this together"
- Steve "Red Green" Smith
Reply With Quote
Old 01-15-2010, 07:41 AM
guitarmedic87 guitarmedic87 is offline
Posts: 233

just talked to my base hopsital and asked about this. Apparently each base hospital can set what they want their medics shocking at. Typically most base hospital are the same or close but I guess there can be some variation.

"perfect practice makes perfect, so keep practicing until your practice is practically prefect"-unknown
Reply With Quote
Old 03-06-2010, 04:49 PM
FireEMTGuy's Avatar
FireEMTGuy FireEMTGuy is offline
Location: Alberta, Canada
Posts: 387

The American Heart Association and ACLS tend to be the most commonly followed guidelines for cardiac protocol.

They have a bad habit of tossing the official ruling off to the manufacturer's recommendations. Zoll, Medtronic, etc all have their own recommendations when it comes what biphasic joules to shock at. Monophasic is a thing of the past and kills heart muscle.

The Advanced Cardiovascular Life Support program which is developed by the AHA, offers a 'guideline' of 200J for biphasic defibrillation. It also outlines specifics when it comes to Cardioversion, which are derived from studies regarding certain rhythms (a-fib, stable VT).

AED's and LP12's (AED Mode) come from the factory with standard settings. When you unpack them you enter the program mode and set the default settings to your services protocol, typically set by your medical director, typically following recent studies or ACLS guidelines.
Reply With Quote
Old 03-22-2010, 04:23 AM
lifepower lifepower is offline
Location: California
Posts: 1
Default aed defibrillators

An electric shock through the chest wall to the heart.

Is it useful to you!
Reply With Quote
Old 06-12-2010, 04:10 PM
FFPCP's Avatar
FFPCP FFPCP is offline
Posts: 43

we have our joules settings changed all the times based on updated protocols, we do manual settings for the most part. our newest is delivering a shock to children, 2 Joules/kg for the first shock and 4joules/kg for any subsequent shocks.
Reply With Quote
Old 02-05-2011, 04:37 PM
iekvek iekvek is offline
Posts: 18

It depends on the manufacturer and their specifications. The energy level can vary from one type to another and the goal is to obtain 'equivalent energy'. The idea is to account for transthoracic impedance (amount of resistance) and most automated, semi-automated and manual defibrillators account for this as it senses the distance and resistance between the two pads.

For example, in a Physio Control product, you might select 360 joules but you don’t actually know the amount of energy delivered due to a number of variables so it is 360 joules of ‘equivalent energy’. As it was already indicated, you can equal the level of joules through different means. (Joules (Energy) = Voltage X Current X Time), any number of combinations depending on the voltage, the current and length of time it is expelled.

It is becoming more standard practice to defibrillate once at the highest energy setting and not ‘stacking shocks’ as the higher energy level has demonstrated a higher efficacy and often results in less defibrillations to overcome the fibrillation threshold.

Check this link, it simplifies it: http://www.resuscitationcentral.com/...asic-waveform/
Reply With Quote
Old 03-22-2013, 01:12 PM
ACPFF ACPFF is offline
Posts: 1

Originally Posted by guitarmedic87 View Post
Is it possible it defers from province to province??
Defibrillator manufacturers specify the recommended power settings for their equipment.
While Medical Directors are always free to determine the settings they wish used, for the most part doctors simply state to follow manufacturers recommendations.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -8. The time now is 01:29 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.